Church Saw ™
Cold Saw

12 1/2" (315 mm) Blade cuts steel and aluminum fast and cleanly.

• 3 Horsepower

• 36 rpm

• 22 volt single phase

• Gear Reduction head

• Double pivot point on the head to prevent vibration and make better cuts

• Miters both left and right up to 90 degrees

• At 90 degrees slotting cuts can be made

• Self centering vise always keeps the blade at top dead center over the work piece

• Adjusting vise jaws

• Fully guarded blade

• Built in coolant tank and pump

• Hand Trigger on/off

• Spring assist head up

• Emergency stop switch

• Free blade included

• Shipping weight 450 lbs

• Capacity - 90 / 4" tubing 2" solid steel - 5 1/2" x 3 1/2" rectangles
                   45 / 4" x 4" tubing,  1 3/4" solid steel

#WFCS315

Church Cold Saw

$1895.00 (Call for Shipping Quote)

Scotchman ™
Cold Saw

CPO 315 HFA

Standard Features

                            Fully Automatic Cycle

                            Push Button Controls Actuate the Complete Cycle

                            5 H.P. Variable RPM Speed Control (Ferrous Model)

                            3.8 H.P. - 3,000 RPM (Non-Ferrous Model)

                            Interlocking Safety Hood

                            Clamping Both Sides of Blade - Highest Quality, Burr-Free Cuts

                            Blade Guides for Accurate Tolerances (Ferrous Model)

                            Flood Coolant (Ferrous Model)

                            Mist Coolant (Non-ferrous Model)

                            Adjustable Stroke Control on the Saw Head

                            Adjustable Down Feed Control on the Saw Head for Feed Pressure and Feed Rate

                            Piece Counter

                            Length Scale in Both Inches and Metric

                            Quick and Easy Fine Adjustment of Length Setting

                            One Saw Blade

                            One Gallon Concentrated Coolant

                            Warranty: Three Years

                            Made in USA

                            Optional Equipment:
Mist Coolant
Form Jaws for Multiple Tubes
Digital Read-out for Quick Easy Length Setting
Ten Foot or Twenty Foot Material Supply Track

Capacities & Specifications

Scotchman ™
 

Optional Material Stop Roller Conveyor Mounted with an Advanced Measuring Quick-Loc System

Designed for quick, easy and accurate length setting. Available left to right or right to left material feed.
                

Scotchman ™
Band Saw

Scotchman ™
Band Saw

Scotchman ™
Band Saw

Scotchman ™
Band Saw

Scotchman ™
Band Saw

SHA 1419 -SHA 1419

Standard Features

                            Head Swings 60 degrees - No Material Movement

                            3 HP Variable Frequency Blade Drive Motor

                            Quick Head Approach with Hold for Ease of Line-up

                            Hydraulic Feed Control with Separate Adjustable Rate and Feed Pressure

                            Hydraulic Full Stroke, Full Capacity Vising

                            Hydraulic Head Raise

                            Hydraulic Vise Clamp

                            Infinitely Adjustable Blade Speed via AC Inverter

                            Saw Guides, Spring Loaded, Solid Carbide Inserts for Clean Accurate Cuts

                            Replaceable Steel Wear Plates on Bed

                            Recirculating Flood Coolant System w/Splash Guard

                            Wash Down Hose with Hanger for Easy Cleanup

                            Powered Blade Brush for Straight Cuts and Longer Blade Life

                            Saw Blade Guard for Operator Safety

                            Instruction and Parts Manual

                            Warranty: Three Years

                            Made in USA

                            Optional Features:
Overhead Nesting Vise
Variable Vise Pressure

Mist Coolant Band Lubricator
Work Light
Roller Conveyor
220 Volt, 1 ph
Outboard Fence

Capacities & Specifications

Swing Head	14 x 19 Capacity
Capacity at 90 degrees	14" High x 19" Wide 15" Rounds
Capacity at 45 degrees	14" High x 14" Wide 15" Rounds
Capacity at 30 degrees	14" High x 10.5" Wide 10.5" Rounds
Blade Drive Motor	3 HP Variable Frequency AC Drive
Hydraulic System	0.5 HP
Feed Control	Hydraulic with Adjustable Rate and Feed Pressure Spring Balanced Head
Vise	Hydraulic, Full Stroke, Full Capacity
Bundling	Optional hydraulic, full capacity
Drive Wheel	20" Diameter Cast Iron
Blade Speed	AC Inverter Variable, 70 to 400 SFPM
Blade Specifications	1-1/4" x .042" x 197" Bi-Metal
Blade Tension	Spring Loaded by Handwheel
Coolant System	Flood, Recirculating with 5 Gallon Reservoir
Voltage (Please Specify)	208, 230, 460 60 Hz 3 Ph 220 Volt 1 Ph (Optional)
Dimensions	L: 92" x W: 42" x H: 68"
Weight	1,700 lbs.

Scotchman ™
Band Saw

Scotchman ™
Band Saw

Vc-20

Vertical Contour

    The Scotchman Vertical Contour Saw is a versatile machine that can saw wood, plastic, steel, aluminum or stainless steel. The variable frequency drive makes changing speeds easy. Blade widths from 1/8" to 1" allow for cutting tight radiuses or cutting off large sections. This general-purpose vertical contour saw offers versatility, dependability, and production capability that makes it an indispensable addition to most shop applications.

Scotchman ™
Band Saw